Page History
...
- First you must setup a RealTimeConnector.
- Drag and drop the AlarmRecipient from the palette in the AlarmService.
- Fill the optional alarm data you want to add to the document which will represent each alarm record. Example: msgTxtmsgText, building, floor etc.
- Give a name to the device (in your service) which will be dedicated to alarms in the destination field.
- Select the connector.
- In the AlarmService Wiresheet, create a link from the "alarm" slot in an AlarmClass to the "Route Alarm" slot in the AlarmRecipient.
- You can also test the component by triggering the "Route Alarm" action
...