Summary
This recipient is responsible for sending alarm events to an IoTCore device.
Implementation
- Open the btibGoogleIoTCore palette and drag and drop the GoogleIoTCoreAlarmRecipient to the AlarmService.
- Fill the optional alarm data you want to add to the document which will represent each alarm record. Example: msgTxt, building, floor...
- Give a name to the device which will be dedicated to alarms in the destination field. (IoTCore doesn't have a native representation of alarms, this is why we use a dedicated device which collects all the alarm events).
- Select the connector if you have multiple IoTCore connectors in your station
Properties
- Status: Alarm recipient status.
- Fault Cause: The error message field.
- Enabled: Enable the recipient.
- Optional Alarm Data: Additional tag to be added to the message generated for each alarm (contained in the alarmData field in Niagara)
- Destination: Name of the device dedicated to alarms in IoTCore
- Connector: The associated IoTCore connector
Actions
- Initialize: Initialize the connection with IoTCore.
- Disable: Disable the recipient.
- Clean: Unregister the recipient.
Fault Causes
- Connector Not Found: if there is no connector in the Btib Service > External Connectors > realtime Connector folder, try to add one.
- Any other: Just clean and initialize.