Sends the point's tags.
Trigger
You must setup a RealTimeConnector, a parent Device with a DeviceExt and a Point with a PointExt.
The points tags are sent automatically during the initialization. You can also initialize it through the "Initialize" action.
The destination is specified in the connector's advanced config.
Example
{
"cur": "M",
"displayName": "CO2",
"description": "",
"site": "Site 1",
"unit": "ppm",
"deviceId": "T5C8JDsW8RKH6YQ10lVz;nzqXbuNwGUcC9wkLsryP",
"name": "CO2",
"hisInterpolate": "linear",
"pointId": "h0SBMPEboU8lmo1PCSxvM"
...
}